Sub Pages Banner


Technology & Engineering



More than two decades of rich experience in Engineering Design of LNG Facilities and other industries including Petrochemical/Chemical, Mining and Infrastructures. Covering both home office (Engineering works including as built) and field office works (Field Engineering, Construction supervision, Field Material Management, Pre-Commissioning and Commissioning). This division is composed of qualified Engineers and Designers with well established, up to date guidelines and procedures dedicated to ensure safety, quality and on time product delivery.


Skills and Capabilities
  • Process design (including P&ID development covering Process, Utility and Offsite areas)
  • Engineering Design for Flare networks
  • Thermal rating for Shell and Tube Heat Exchangers, Double Pipe Heat Exchangers and Air Fin Coolers
  • Fire Protection Engineering
  • Material Engineering (including painting and insulation)
  • Technical Safety Studies
  • SPPID CAD drafting with intelligent data input
Design Software Competency
  • Aspen HYSYS
  • Flare System Analyzer
  • Honeywell UniSIM Design
  • Honeywell UniSIM Flare
  • SimSci ProII
  • HTRI Exchanger Suite
  • Siemens Pressure Protection Manager Sunrise systems Pipenet
  • Shell FRED
  • Zenator Power User
  • Go Completions
  • WinPCS
  • Smart Plant P&ID (SPPID)
  • AutoCAD
Design Codes and Standard
  • API
  • NFPA
  • TEMA
  • DEP for Shell Projects
  • GP for Exxon Mobil Projects
  • GAP Guidelines
  • JICA
  • ANSI
  • ASTM
  • JIS
Philippine local regulations
Notable Designs
  • HAZOP facilitation for Liquid fuel terminal (2018)
  • Metal temperature determination for pressurized venting to ASL (2015)
  • FEED and EPC (roll-over) for process design Refinery upgrade to Euro-4 standards (2015)
Skills and Capabilities
  • Power System Study and Analysis          
    • Short Circuit, Load Flow, Motor Starting, Relay Coordination, Arc Flash, etc
    • Single Line Diagram
  • Detailed Design for construction drawings and 3D modelling
    • Hazardous Area Classification
    • Power, Lighting, Grounding, Lightning, Telecom, Cathodic Protection
    • Cable Schedule, Connection Diagram, etc
  • Material and Equipment Engineering
    • Electrical specification and data sheet
    • Electrical equipment sizing and other calculations
  • Procurement support
    • Requisition, Technical bid Evaluation, Vendor print review, etc.
  • Bill of Quantities (BOQ) / Material Take-Off (MTO)
Design Software Competency
Electrical Engineering Software
  • SKM
  • ETAP
  • eDPP
  • SPEL
  • AGi32
  • Luxicon Pro
  • Dialux
3D Modelling Software
  • E3D
  • PDS
  • PDMS
  • SP3D
  • SPR
  • Navisworks
2D CAD Software
  • AutoCAD
  • Microstation
Design Codes and Standard
  • American Petroleum Institute (API)
  • International Electrotechnical Commission (IEC)
  • Institute of Electrical and Electronics Engineers (IEEE)
  • American National Standards Institute (ANSI)
  • National Electrical Code (NEC)
  • National Fire Protection Association (NFPA)
  • National Electrical Manufacturers Association (NEMA)
  • Shell Design and Engineering Practice (DEP)
  • Exxon Mobil Global Practices (GP)
  • Philippine Electrical Code (PEC)
Notable Design
  • Electrical Design for Airport
  • Modular Design
  • Intake Substation (connection to Power Grid) Design
Skills and Capabilities
  • Mechanical Design of Process Equipment
    • Mechanical Datasheet
    • Loading Data & Engineering Drawing
    • Mechanical Design Specification
  • Procurement Support
    • Requisition, Technical bid evaluation, Vendor print review, etc.
Design Software Competency
  • Compress 2020 Build 8000
  • AutoCAD 2020
  • PV Elite
  • Sp Venus
  • Navisworks Freedom
  • TankestPro
  • Bluebeam Revu
  • Adobe Acrobat
Design Codes and Standard
  • ASME
  • TEMA
  • NACE
  • HEI
  • NFPA
  • API
  • ASCE
  • UBC
Skills and Capabilities
  • Construction Design
    •  3D modeling, 2D CAD works & SPI-generated construction deliverables like Wiring & hook-up
  • Field Instrument Design
    • SPI Data Sheet & Instrument Index
  • System Design
  • Procurement support
    •  Requisition, Technical bid evaluation, Vendor print review, etc.
  • Bill of Quantities (BOQ) / Material Take-off (MTO)
Design Software Competency
Instrument Engineering Software
  • SPI - Smart Plant Instrumentation
3D Modeling Software
  • PDS - Plant Design System
  • PDMS - Plant Design & Mgt. System
  • SP3D - Smart Plant 3D 
  • SPR - Smart Plant Review [SPR]
  • NAVISWorks
 2D Drafting Tools
  • MicroStation
  • AutoCAD
Design Codes and Standard
  • ASME - American Society of Mechanical Engineers
  • ASTM - American Society for Testing and Materials
  • API - American Petroleum Institute
  • ANSI - American National Standard Institute
  • BSI - British Standards Institution
  • IEC - International Electrotechnical Commission
  • JIS - Japanese International Standards
  • NEC - National Electrical Code
  • NFPA - National Fire Protection Association
  • NEMA - National Electrical Manufacturers Association
  • ISO - International Organization for Standardization
Notable Design
  • Modular Design
Skills and Capabilities
  • Piping Design
  • 3D Modeling
  • Piping Estimation
  • Piping Stress Analysis
  • Material Engineering
  • Material Management
  • Plant Layout (Plot Plan)
  • Procurement Support
    • Requisition, Technical bid evaluation, Vendor print review, etc.
  • Bill of Quantities (BOQ) / Material Take-off (MTO)
Design Software Competency
3D Modeling
  • Plant Design System [PDS]
  • Plant Design & Mgt. System [PDMS]
  • Smart Plant 3D [SP3D]
3D Model Viewing
  • Smart Plant Review [SPR]
  • NAVISWorks
2D Drafting Tools
  • MicroStation
  • AutoCAD
Calculation Tools
  • AutoPipe for stress analysis
  • Caesar II for stress analysis
  • FE Pipe
Design Codes and Standard
  • ASME 
  • ASTM
  • API
  • ANSI
  • BSI
  • JIS
  • MSS/SP
  • NFPA
  • PFI
Notable Design
  • Modular Design
Skills and Capabilities
  • Structural Planning and detail design for; 
    • Steel & RC Structures
    • Equipment Foundation (including dynamic analysis)
    • Vessel Platform & Ladder
  • Conceptual Planning 
    • Underground Facilities (including hydraulic calculation)
    • Roads & Pavements
  • 3D Modeling of Structures and U/G Facilities
  • 2D CAD Drawing 
  • Steel Shop Fabrication Drawing Preparation including Material List
  • Vendor Drawing Check / Tekla Model Review
  • Building Design
    • Architectural
    • HVAC
    • Plumbing
    • Sanitary
    • Electrical
  • Bill of Quantities (BOQ) / Material Take-Off (MTO)
Design Software Competency
Calculation Tools
  • MAT 3D
  • RAM Connection
  • AllPile
  • Civil Storm
  • Excel Spreadsheet
2D Drafting Tools
  • AutoCAD
  • MicroStation
3D Modeling Tools
  • PDS
  • PDMS
  • SP3D
  • 3Dx_ACAD (In-house)
  • Tekla Structure (X-Steel)
  • UG_Gen (In-house)
  • E3D
3D Viewing Tools
  • SPR
  • Naviswork
  • Tekla BIM Sight
Design Codes and Standard
  • Philippine Code : (NSCP / NBC)
  • American Code : (AISC / ACI / ASTM / AASHTO / ASCE / API)
  • British Code : (BS)
  • Australian Code / New Zealand Code: (AS / NZ)
  • European Code:  ( EURO)
  • Russian Code :  ( RUSS / SNIP)
  • International Code :  ( UBC / IBC)
  • Japanese Code :  ( JIS)
  • Process Industry Practices (PIP)
Notable Design
Dynamic Analysis and Design of Foundation for Heavy Equipment
  • Block and Table Top Type Foundation for Compressors
  • Design Check for Dynamic and Finite Element Analysis to verify machine dynamic resonance in foundation system.
Dynamic Soil-Structure Interaction Analysis 
  • Design of Structure constructed on the relatively soft ground, which may alter the dynamic characteristics of the structural response significantly. 
Structure Modular Design
  • Conceptual study and layout for modularization
  • Design check for In-Place, Lifting, Land Transportation and Sea Transportation
  • Concept and design check of Sea Fastening and Grillage


Consultation & Feasibility Studies
Project Support

A member of

Chiyoda Philippines Corporation (CPh), one of the major affiliates of Chiyoda Corporation (Yokohama, Japan), is a global engineering service contractor primarily engaged in detail design of various plants and facilities mostly gas processing and LNG plants.


Read More



  15th Flr. Sun Plaza Building
1507 Shaw Boulevard cor. Princeton Street

Barangay Wack-Wack, Mandaluyong City,

1555 Philippines


CPh employees, officers and the top management, including members of the board of directors progressively and consistently work towards attaining a culture of compliance by taking responsibility and commitment to freely embrace the spirit of the Chiyoda Group Code of Conduct through adherence and observance, among others, of the following: applicable laws, regulations, and standards on compliance with antitrust, data privacy, information security, health, safety & environment, anti-bribery & corruption, labor, and taxation and accounting; relevant employee trainings; innovation of best practices, and implementing policies and internal controls.


Privacy Policy